JE-MA T31, T36, Fertilizer Auger

JE-MA conveying augers T 31/T 36 will turn out to be a mostvaluable, reliable and labor saving aid whenever there is a needfor moving or shifting grain, fertilizers or granulated materialsfrom one place to another or when fertilizer distributors or seeddrills have been filled up.
In spite of their lightweight design these augers are of aconspicuous sturdiness that will endure even very hard tear andwear.
The auger tube is kept in PVC-plastic that never will give riseto any corrosion whatsoever. The plastic material provides a lowweight and bearing characteristics for the auger are excellent.
The auger top and bottom are quickly released so that it is easyto detach the whole auger for cleaning. It is operated by meansof an oil pump, which through oil pressure tubes is connected tothe tractor hydraulic pump.
T 31 is delivered in the lengths 2.0 m, 3.0 m and 4.0 m.
T 36 is delivered in the lengths 3.0 m and 4.0 m.
The 2.0 m model is only suitable for filling drill machines withmax. 4.0 m working width.
The 4.0 m model is suitable for filling drill machines with max.4.0 m working width.
The 4.0 m model is suitable for filling drill machines with max.6.0 m working width.
An enumeration of standard equipment for all models is containedin our price list.

The 2.0 m model is mounted vertically at the rear end of thewagon in a chain suspension.
Essen cheap hotelsThe 3.0 and 4.0 m A models are mounted at the rear end of thewagon in a special wagon suspension. During transportation thissuspension can be placed horizontally on top of the wagon.

The B models 3.0 and 4.0 m are furnished with a big inlethopper and adjustable suspension. The angle position of the auger- as compared with the wagon - is easily altered by means of theadjustable suspension.

The 3.0 and 4.0 m C models have both a big inlet hopper and anadjustable suspension. The C models are driven by the tractorp.t.o. shaft through a transmission shaft under the wagon.

the B and C models serve as shown also for shifting thematerial in question from a fertilizer / lime distributor.

Model D 4.0 m is furnished with a big inlet hopper, a trolleyand a big inlet hopper, a trolley and a drawbar coupling fortrailing. here again the auger is applicable in connection withseveral types of different wagons. The auger is trailed byconnecting it to a wagon or to a tractor.

T 23, Fertilizer Auger

Loading auger T 23 is marked in 3 different lengths: 4.0 m,5.0 m and 6.0 m.
The 4.0 m model is delivered with fork and suspension girder bendadapted to the side of the wagon.
The 5.0 m model and 6.0 m model is delivered with an extendedslide bush and a 3.7 m sliding rail for the wagon side.
In the delivery of all models is also included a hydraulic motorOMP 50, which is used for activating the augers. The hydraulicmotor is driven by the tractor hydraulic pump through oilpressure tubes.
An enumeration of standard equipment for these models is found inour price list.

If wanted it is possible to employ the T31 fertilizer auger asa loading auger. In this case take off the t 31 inlet piece andinstall the T 23 bottom guard. The auger should then be mountedby means of the fork and the suspension girder for the wagonside. by doing so the t 31 has been altered into a T 23 auger.

All hydraulically driven JE-MA auger have asa standard a pressure filter for cleaning the hydraulic oil andfor protecting the hydraulic system.

**Technical dates:**
TYPE	WEIGHT	MOTOR TYPE	DIAMETER	TOTAL LENGTH

T 23 4.0 m	60 kg	OMP 50	150 mm	4300 mm
T 23 5.0 m	78 kg	OMP 50	150 mm	5300 mm
T 23 6.0m	96 kg	OMP 50	150 mm	6300 mm

T 31 3.0 m	53 kg	OMP 50	150 mm	3500 mm
T 31 4.0 m	64 kg	OMP 50	150 mm	4500 mm

T 36 3.0 m	158 kg	OMP 50 - OMP 80	200 mm	3500 mm
T 36 4.0 m	190 kg	OMP 50 - OMP 80	200 mm	4500 mm