Herbst/Willibald

Stone-eater


The total solution foryour stone problem.


Why do you need astone-eater?

Your land is covered with stones which not only reduces youryields, but also creates expensive repairs and wear on all yourworking equipment.

The wear and tear as well as the output of the machine dependson soil conditions, as well as the quantity of stones and thetype of stones.

This is the way wesolve your stone problem - How does it function?

The intake rotor picks up the stones to a depth of 5centimeters and throws these to the slasher rotor. As both rotorsrun in reverse rotation the slashing power is increased. Thestones hit the rotating slashers and are smashed instantly. Theslasher rotor works about 10 centimeters above the ground leveland large stones will be pre-smashed this way. This way stones ofup to 30 centimeters can be smashed. The intake rotor is rotatingagainst the stone size guard which insures that stones smashed toa bigger size than 30 mm will not escape. At the same time abeautiful warm seed bed is prepared.

Pending Conditions -Productions

1/2 to 1 ha per two hours with a working width of 1.90 metrosand using 100K.W. is possible.

Where to use it?

Agricultural land, horticulture, road making, sport andrecreation grounds.

  STZ 125 STZ 1350 STZ 1900
Working width 1240 mm 1350 mm 1900 mm
Total width 1530 mm 1700 mm 2250 mm
Revolutions / P.T.O. 1000 1000 1000
P.T.O. connection 1 3/4" / 20 1 3/4" / 20 1 3/4" / 20
ERROR MSGNumber of slashers 10 12 18
Rotor speed (slasher) U/min 1710 1550 1550
Rotor speed (intake) U/min 275 250 250
P.T.O. power req. kW/H.P. min. 55 / 75 max.74 / 100 min. 74 / 100 min. 100 / 136
3 point linkage Kat. II luxury suite StuttgartKat. II + III Kat. II + III
Weight 1100 kg 1600 kg 2000 kg

Herbst Group home page
Herbst farm centre

If you have any questions or suggestions concerning these pagessend an email to marco@herbstgroup.com

- | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |